Hydraulic products Gallery : Hydrolink, Leaders in Fluid Engineering

50 TON COILED TUBING SPOOLER

Techanical Specifications
Skid Overall Dimension Length of skid (fully closed) Length of skid (extended condition) Width of the skid Height of skid without reel drum Height of skid with reel drum Dimensions for transportation Unladen weight of CT frame Telescopic skid stroke length per one side Telescopic skid total stroke length Max. Metal spool weight including fluid or mud Rated system pressure of radial piston motor Max. System pressure Hollow shaft with WECO thread ratings Internal bore of hollow shaft Max. Hydraulic fluid flow rate Nominal output torque of main drive shaft Max. Output torque of main drive shaft (intermittent) Max. Output turning speed of main drive shaft Max. Inclination of levelwind arm Min. Brake release pressure) Max. Working pressure of compressed air receiver tank Max. Reel dimension Min. Reel dimension	: 4578 mm (180.1/4” ) : 6518 mm (256.1/2” ) : 4300 mm (169.1/4” ) : 3329 mm (131”) : 5658 mm (222.3/4”) : W: 169” H: 131” L: 180” : 13,500 kg : 38” : 76” : 50,000 kg : 3000 psi : 5000 psi : 10,000 psi : 1.88” : 33 gpm : 29,980 Nm : 49,000 Nm : 14 rpm : 60 deg. With Respect to horizontal : 1600 psi (110 bar) : 150 psi : 204” dia. x122” width : 135” dia x 80” width
APPLICATION : Oil Field Equipment

OIL FIELD EQUIPMENT - RIG SPOOLER

Techanical Specifications
Overall Dimension Load Capacity Max. Reel Dimension Speed Weight Eye Pad Paint Finish Prime mover Pump flow Hydraulic Oil	: 3.9 X 2.8 X 1.5 meter (w/o drum) : 10 ton : Dia. 92 inches X 68 inches width : 0-20 rpm : 3 tonnes w/o drum : Each rated for 6 ton : Marine Standard – 4 coat finish Paint levels (in microns), primer 50, Inter- 150, 2X Top coat- 100 : Diesel Engine-7.5 kw @ 1800 rpm : 11 LPM : VG 68 (68 cst mineral oil)
APPLICATION Installation of cable with pumping equipment at well location.

HYDRAULIC FLUSHING RIG

Technical Specification
Diesel Engine Hydraulic Pump Filtration Element Pressure relief valves Pressure gauges Oil Tank Capacity Diesel Tank Oil heater setting Heater cut off temp Engine cut off temp Battery Suction Strainer Weight	: Sun 6105-125kw@2300 rpm : T6EDC 072-050-025-1R00 A1 FO : LF100103VG10BP FSA SAE 50 : 01NR 1000 3VG 10 BP : 0-230 bar. : 0-400 bar. : 1800 Lit. : 160 Lit. : 70 ˚C : 80 ˚C (refer control dwg.) : 12volt, 100 amps : 3”-600 lpm-125 microns : 5.5 ton
APPLICATION Hydraulic pipeline cleaning, new piping installation Hydraulic flushing and system performance

GROUND SPOOLER

Techanical Specifications
Load Capacity PRM Maxi Reel Dia No of Cylinders No of Hyd. Motor Hydraulic Unit W.pressure Flow Hyd. Tank Capacity	: 10 ton : 10-35 : 92 inches : 2 : 1 : 1 : 100 bar : 37.5 lpm : 150 lit
APPLICATION Winding, unwinding and measuring of cable from reel during maintenance of cable.

DIESEL ENGINE DRIVEN HPU

Techanical Specifications
Working pressure Flow Hydraulic Tank capacity Diesel Engine Capacity	: 210 bar : 42 lpm : 250 lit : 33kw @ 1800 rpm
APPLICATION Under water Hydraulic equipment driving power unit

OIL RIG CANTILEVER STRUCTURE SKIDDING HPU

Techanical Specifications
Pump Flow Operating Pressure No of Unit Electric Motor	: 124.4 lpm : 190 bar : 1+1 (Stand By) : 37.5KW (Explosion Proof)

HULL CLEANING EQUIPMENT

Technical Specification
Working Pressure Flow Hydraulic tank capacity	: 120+120+80+80 : 42+42+18+18 LPM : 250 LITRE

UMBILICAL WINCH

Technical Specification
Bare drum line pull Bare drum line speed Bare drum radius Reduction ratio Operating pressure Motor displacement Flow Specific torque Drum Capacity	: 1000 kg : 0.37 m/s : 0.35 m : 5.0 : 190 bar : 400 cc/rev. : 19.87 lpm : 0.37 daNm/bar : 1” Hose 300 mtr : ¾” Hose 300 mtr
APPLICATION This machine is used to store and feed hydraulic hoses to connect under water Hydraulic tools.

DOUBLE BELL COUPLING TEST BENCH

Techanical Specification
Maximum test Pressure Inner dia of coupling Height of coupling Coupling dia. adjustment Coupling clamping Transfer stn. tilt mechanism Hydraulic system motor Water system motor Water system Pump Weight Overall Dimension	: 50 bar : Min: 266mm, Max: 3000mm : Min: 266mm, Max: 390mm : Manual : Hydraulic : Hydraulic : 10Hp X 380V X 50Hz X 3Ph : 3Hp X 380V X 50Hz X 3Ph : Plunger type : 10 ton : 6.6M X 3.9M X 3.2M (Height)
APPLICATION This machine is used to Pressure Test Fiber Glass Pipe couplers of sizes with in the range of 266 mm to 3000 mm in diameter in pipe manufacturing industries.

REACTOR DOOR OPENING/CLOSING SYSTEM

Techanical specifications
Pump Flow No of Unit Electric Motor No of Unit Supplied	: 3 lpm @ 100 bar : 3 nos : 1.5 KW : 3 nos

HPU FOR HYDRAULIC PRESS

Techanical specifications
Pump flow Operating pressure No fo unit Electric Motor	: 10.4 lpm : 600 bar : 1 nos : 18.5 KW

LINE CONTROL SYSTEM FOR PIPE BARGE

Techanical specifications
Maximum Test Pressure Maximum Motor Capacity Maxi Motor Rpm Reservoir Capacity	: 400bar : 130 Cc/ Rev : 3500 Rpm : 200ltr

HYDRAULIC TEST BENCH

Techanical specifications
Maximum Test Pressure Maximum Motor Capacity Maxi Motor Rpm Reservoir Capacity	: 400bar : 130 Cc/ Rev : 3500 Rpm : 200ltr
APPLICATION Function test hydraulic pumps and motors Proof test hydraulic pumps and motors Function test hydraulic power pack

SCAFFOLDING PIPE STRAIGHTENING MACHINE

Techanical specifications
Maxi Pipe size Speed Operating Pressure Electric Motor Flow Operation	: 1000kg : 0.37 m/s : 65 bar : 4 Kw, 3 ph, 380volt,50 Hz : 30 lpm : Automatic/Manual
APPLICATION This machine is used to straightening pipes in Scaffolding Industries

20-TON FORK LIFT CARRIER TYPE DRUM TRANSPORTER

Techanical specifications
Maximum Vehicle Speed Maximum Lift Capacity Maximum Lift Maximum Tilte Angle Steering Angle Maximum Gradeability Surface Condition Engine Gross Vehicle Weight Overall Dimensions	: 3 Kph : 20 ton : 350 mm : 7°C and + 3°C : +/-45° : 5% : Pavement : 54 kw @ 1800 rpm, 4 Cylinder : 25 ton : 4.0M X 3.5M X 2.2M (LXWXH)